Text Box: AUDIO ENGINE MANUAL PAGE # Text Box: PWR + Text Box: GROUND Text Box: WIRE THAT IS LARGER THAN 4 GAUGE Text Box: WHEN USING WIRE THAT IS LARGER THAN 4 GAUGE FROM BATTERY TO AMPLIFIER!!!!!! A TERMINAL BLOCK MUST BE USED WHEN NO CAPACITOR OR BATTERY IS USED THAT IS CLOSE TO AMPLIFIER. THE TERMINAL BLOCK SHOULD BE CLOSER THAN 3 FEET TO THE AMPLIFIER TERMINALS. Text Box: AUDIO ENGINE POWER TERMINALS ARE DESIGNED FOR LUGS THAT HANDLE UP TO 4 GAUGE WIRE! LARGER WIRE WILL PUT TOO MUCH PRESSURE ON TERMINAL PANEL. NEVER EXCEED 4 GAGE SIZE BETWEEN TERMINAL BLOCK AND AUDIO ENGINE! THIS IS O.K. SINCE 4 GAUGE IS GOOD FOR UP TO 3200 WATTS UP TO 2 OR 3 FOOT LENGTHS ONLY. SO KEEP THE TERMINAL BLOCK CLOSE TO THE AMPLIFIER. WHEN USING A CAP AND/OR BATTERY THE BLOCK IS UNNECESSARY. Text Box: TERMINAL BLOCK NEXT