Text Box: PAGE NUMBER # Text Box: REFER TO THE BOTTOM OF THE SECTION UNDER "CONTROLS AND FEATURES" THAT SHOWS THE CROSSOVER FREQUENCY RANGES. THE DIP SWITCHES ARE USED TO SELECT WHICH SLIDER RANGE OF FREQUENCIES ARE ROUTED TO A PARTICULAR OUTPUT JACK. THE CROSS-OVER BANDS CAN BE UNDERLAPPED (SKIPPING A SLIDER POSITION) AND SET NORMALLY TO -3DB POINTS ( AS SHOWN IN THE FOLLOWING EXAMPLES.) OVERLAPPING WILL NOT WORK. 2-WAY EXAMPLE FOR A WOOFER RANGE OF 18 HZ TO 72 HZ AND A HIGH PASS RANGE OF 72 HZ TO 22 KHZ SET THE DIP SWITCHES AS FOLLOWS USING THE TEMPLATE: SW-2 #1&2 OFF #3&4 ON SW-3 ALL ON SW-5 ALL ON SW-6 ALL ON SW-7 ALL ON SW-8 #1 (63 HZ SLIDE) OFF #2, 3, & 4 (80, 100, & 125 HZ SLIDES) ON SW-10 ALL OFF SW-11 ALL OFF SW-12 ALL OFF SW-13 #1 (63 HZ SLIDE) ON #2, 3 & 4 (80, 100, & 125 HZ SLIDES) OFF 3-WAY EXAMPLE FOR A WOOFER 18 HZ TO 57 HZ, A MID RANGE 57 HZ TO 1.4 KHZ, AND A TWEETER 1.4 KHZ TO 22 KHZ SET THE DIP SWITCHES AS FOLLOWS: SW-2 ALL ON SW-3 ALL ON SW-5 ALL OFF SW-6 ALL OFF SW-7 ALL ON SW-8 ALL ON SW-10 ALL OFF SW-11 ALL OFF SW-12 ALL OFF SW-13 ALL OFF 4-WAY EXAMPLE TO ADD A MID BASS AMPLIFIER FOR 57 HZ TO 90 HZ TO THE ABOVE SYSTEM: SW-2 ALL ON SW-3 ALL ON SW-5 ALL OFF SW-6 ALL OFF SW-7 ALL ON SW-8 #1&2 OFF #3&4 ON SW-10 ALL OFF SW-11 #1&2 ON #3&4 OFF SW-12 ALL OFF SW-13 ALL OFF SLOPES ARE IN EXCESS OF 40 DB PER OCTAVE ...