Text Box: PAGE NUMBER # Text Box: PLEASE LOOK AT THE SHADED AREAS ON THE SET-UP TEMPLATE! These shaded areas show which dip switches are used to select their corresponding eq sliders. also note that SW 13, SW 11, and SW 8 correspond though the same group of sliders (63, 80, 100, and 125hz.) only one slider can be selected at a time if this not used full Text Box: IMPORTANT! FREQUENCY BANDS NOT DESIRED AT THE RCA OUTPUT JACK(S) MUST BE SWITCHED OFF. IN OTHER WORDS FREQUENCY BANDS THAT ARE NEEDED AT THE OUTPUT JACK(S) MUST BE SWITCHED ON. EACH SLIDER DIP SWITCH TURNS THAT BAND "OFF OR ON" AT THE PARTICULAR RCA JACK. IN THIS EXAMPLE THE 63 HZ SLIDE HAS BEEN SELECTED FOR THE MID-BASS OUTPUTS. (#1 OF SW11.) SINCE A SLIDE MAY ONLY BE SELECTED FOR ONE OUTPUT (EXCEPT FOR FULL RANGE) THE WOOFER AND MIDRANGE (#1 OF SW 13 AND #1 OF SW8) MUST BE OFF. IF THE 63 HZ SLIDE WAS SELECTED FOR THE WOOFER, THEN #1 OF SW11 AND SW8 WOULD BE OFF.